Home Projects

Turn off water supply, Disconnect old faucet, Install new faucet, Replace sink strainer, Seal with plumber’s putty, Install new supply lines, Check for leaks, Add sink sprayer, Insulate exposed pipes, Clean up workspace

Measure the kitchen space, Identify existing plumbing and electrical, Choose a kitchen layout style, Mark work triangle zones, Place major appliances, Plan cabinet and counter placement, Include storage solutions, Ensure proper clearances, Sketch the layout, Review and adjust as needed, Consult building codes, Finalize the layout plan

Turn off the water supply, Remove the tank lid, Flush the toilet, Inspect the flapper, Replace the flapper if worn, Check the chain length, Adjust the float height, Inspect the fill valve, Replace the fill valve if faulty, Turn the water supply back on, Test the toilet, Replace the tank

Turn off the water supply, Flush the toilet, Soak up remaining water, Inspect the flapper, Replace the flapper if worn, Check the chain length, Adjust the chain if needed, Inspect the fill valve, Replace the fill valve if faulty, Turn water supply back on, Test the toilet, Adjust water level

Turn off power at breaker, Verify power is off, Remove outlet cover plate, Unscrew and pull out old outlet, Test wires for voltage, Label and disconnect wires, Prepare wires for new outlet, Connect wires to new GFCI, Secure outlet into box, Attach cover plate, Turn power back on, Test GFCI

Turn off water supply, Disconnect water lines, Disconnect drain pipes, Remove old sink clips, Cut sealant around sink, Lift out old sink, Clean sink opening, Apply plumber’s putty, Install new sink, Secure sink with clips, Reconnect drain pipes, Reconnect water lines, Turn on water and check for leaks, Seal edges

Turn off power at the breaker, Verify power is off with a voltage tester, Remove switch cover plate, Unscrew and pull out old switch, Note wire connections, Disconnect wires from old switch, Connect wires to new switch, Secure new switch in box, Reattach cover plate, Turn power back on, Test

Turn off water supply, Open faucet to drain water, Disconnect supply lines, Remove old faucet, Clean sink area, Install new faucet, Connect supply lines, Turn on water supply, Check for leaks, Tighten connections if needed

Turn off water supply, Flush toilet to empty tank, Soak up remaining water, Inspect flapper for damage, Replace flapper if worn, Check chain length, Adjust chain if needed, Inspect fill valve, Replace fill valve if faulty, Turn water supply back on, Test toilet flush, Check for continuous running