Park the car on a level surface, turn off the engine, and engage the parking brake.
Inspect the seat cover packaging to confirm it is labeled as airbag-compatible or side airbag safe.
Remove the headrests from the front seats by pressing the release button and pulling them upward.
Slide the seat cover over the seat back, ensuring it fits snugly and aligns with the seat contours.
Align the designated airbag seam on the seat cover with the side airbag location on the seat.
Secure the seat cover using the provided Velcro straps, clips, or hooks, avoiding interference with airbag deployment zones.
Install the seat bottom cover by sliding it over the cushion and securing it underneath with straps or clips.
Cut small holes in the seat cover fabric if necessary to reinstall the headrests through the designated openings.
Reinsert the headrests into the seat through the cover and lock them in place.
Tuck in any excess fabric between the seat back and bottom for a clean appearance and secure fit.
Repeat the installation process for the passenger seat, following the same alignment and safety checks.
Ensure that the airbag seams on both seat covers are not obstructed and allow for proper deployment.
Check that all straps and clips are tightly fastened and do not interfere with seat adjustment mechanisms.
Adjust the seat forward and backward to confirm the cover does not restrict movement.
Inspect the seat cover from all angles to verify a smooth and wrinkle-free fit.
Use zip ties if needed to secure loose straps under the seat, keeping them away from moving parts.
Avoid using non-airbag-compatible covers on seats with side airbags to prevent safety hazards.
Consult the vehicle manual for airbag locations and any seat cover restrictions.
Test the seat recline and height adjustments to ensure full functionality after installation.
Dispose of any packaging materials and tools safely after completing the installation.
