Always turn off water supply before starting any plumbing work., Use gloves when handling sharp tools or metal parts., Ensure all connections are secure to prevent leaks., Keep a bucket and towels nearby to manage unexpected water spills., Do not overtighten fittings to avoid damaging threads or cracking components.
Turn off the hot and cold water supply valves under the sink and verify no water flows when faucet is opened.
Place a bucket under the sink to catch any residual water from disconnected lines.
Use an adjustable wrench to disconnect the old water supply lines from the faucet.
Loosen and remove the mounting nuts securing the old faucet to the sink.
Lift out the old faucet and clean the sink surface of any old sealant or debris.
Insert the new faucet into the mounting holes and secure it using the provided hardware.
Apply plumber's putty around the new sink strainer and press it firmly into the drain opening.
Tighten the strainer nut from underneath using channel lock pliers to ensure a watertight seal.
Wrap Teflon tape around the threads of the new supply lines before connecting them to the faucet.
Attach the other ends of the supply lines to the shutoff valves and tighten with a wrench.
Turn on the water supply valves slowly and check for any leaks at all connections.
Install a sink sprayer kit by connecting it to the diverter port on the new faucet if compatible.
Secure the sprayer hose under the sink and test the sprayer for proper function and leaks.
Measure and cut pipe insulation to fit exposed hot and cold water pipes under the sink.
Wrap and secure the insulation around the pipes to improve energy efficiency and prevent condensation.
Use a utility knife to trim any excess insulation for a clean fit.
Ensure all tools and materials are removed from the workspace and wipe down the area.
Test the faucet and sprayer again to confirm everything is functioning correctly.
Dispose of old parts and packaging responsibly.
Document any issues or future maintenance needs for reference.
new faucet, sink strainer, plumber's putty, Teflon tape, flexible water supply lines, PVC pipe and fittings, pipe insulation, sink sprayer kit
Medium
Take a photo of your current setup before disassembly for easy reference., Use plumber’s tape on all threaded connections to prevent leaks., Choose a faucet with a built-in sprayer to simplify installation., Label hot and cold supply lines to avoid confusion during reassembly., Check local codes if making major plumbing changes.
