Put on rubber gloves to protect your hands from germs and splashes.
Lay old towels or rags around the toilet base to catch any spills.
Pour a generous amount of dish soap into the toilet bowl to lubricate the clog.
Heat water until hot but not boiling, then carefully pour it into the bowl.
Allow the hot water and soap to sit for about 10 minutes to loosen the clog.
Position the plunger over the drain hole, ensuring a tight seal.
Plunge up and down vigorously for about 30 seconds to dislodge the clog.
Flush the toilet to check if the water drains properly.
If still clogged, retrieve a toilet auger for deeper blockages.
Insert the auger into the toilet bowl and gently push it down the drain.
Rotate the auger handle clockwise to break up or hook the clog.
Slowly pull the auger back out, being careful not to splash.
Flush the toilet again to see if the blockage has cleared.
Repeat plunging or augering if necessary until water flows freely.
Dispose of any waste material from the auger into a trash bag.
Clean the plunger and auger with disinfectant after use.
Wipe down the toilet and surrounding area with disinfectant cleaner.
Wash your hands thoroughly after removing gloves.
Ventilate the bathroom to remove any lingering odors.
Monitor the toilet for a few days to ensure the clog does not return.
