Measure the length and depth of your existing countertops to determine the size of new laminate pieces needed.
Turn off water supply and disconnect plumbing before removing the old countertops carefully with a pry bar.
Inspect the cabinet tops for level and use shims or a level to adjust any uneven areas before installation.
Place the new laminate countertops on the cabinets without adhesive to check fit and alignment.
Use a circular saw with a fine-tooth blade to trim the laminate countertops to the correct size if necessary.
Mark and cut out sink and appliance openings using a jigsaw, following the manufacturer's template.
Apply construction adhesive evenly to the top of the base cabinets using a caulk gun.
Carefully lower the laminate countertops onto the adhesive, ensuring proper alignment with walls and edges.
Secure the countertops from underneath using wood screws through the cabinet framing into the countertop base.
Apply a bead of silicone caulk along the seams and wall edges to seal and prevent water intrusion.
Install the laminate backsplash if included, using adhesive and caulk to secure and seal it in place.
Reconnect plumbing and appliances once the adhesive and caulk have fully cured per manufacturer instructions.
Use a file or sandpaper to smooth any rough laminate edges for a clean finish.
Wipe down all surfaces to remove dust, debris, and excess caulk after installation is complete.
Check all seams and joints for gaps and apply additional caulk if needed for a watertight seal.
Ensure the countertop is securely fastened and does not shift or move under pressure.
Reinstall any removed trim or molding around the countertop edges for a finished look.
Test the sink and appliances for proper function and check for leaks under the sink area.
Dispose of old countertop materials and packaging responsibly according to local regulations.
Admire your new laminate countertops and enjoy your refreshed kitchen space.
