Choose a well-ventilated area and cover your workspace with plastic or disposable paper.
Wear nitrile gloves and a protective mask to avoid skin contact and inhalation of fumes.
Use a measuring scale to accurately measure equal parts of resin and hardener.
Pour the resin and hardener into a mixing cup and stir slowly for 3–5 minutes.
Add color pigments, glitter, or small decorative items to the mixed resin as desired.
Slowly pour the resin mixture into clean, dry silicone molds to avoid overflow.
Use a heat gun or torch briefly over the surface to remove air bubbles.
Allow the resin to cure undisturbed for the time specified by the manufacturer, usually 24–48 hours.
Check that the resin is fully hardened before attempting to remove it from the molds.
Gently demold the resin pieces by flexing the silicone molds or pushing from the bottom.
Inspect the finished pieces and sand any sharp edges if necessary using fine-grit sandpaper.
Clean any spills or tools with isopropyl alcohol before the resin hardens.
Store unused resin and hardener in a cool, dry place away from direct sunlight.
Dispose of resin waste and used gloves according to local hazardous waste guidelines.
Avoid pouring leftover resin down the drain to prevent plumbing damage.
Label your resin containers clearly to avoid confusion in future projects.
Keep pets and children away from the workspace during and after the project.
Practice with small molds first to get comfortable with the mixing and curing process.
Document your process and results to improve future resin craft projects.
Wash your hands thoroughly after completing the project, even if gloves were worn.
