Put on protective gloves to avoid contact with dirty water and debris.
Place a bucket under the drain to catch any water or debris that may spill.
Use a screwdriver to remove the drain cover or stopper if present.
Shine a flashlight into the drain to inspect for visible blockages.
Insert the drain snake slowly into the drain until resistance is felt.
Rotate the handle clockwise while gently pushing the snake further into the pipe.
Continue feeding the snake until the clog is cleared or the full length is used.
Retract the snake slowly while continuing to rotate to catch debris.
Wipe the snake clean with a rag as you pull it out to avoid mess.
Dispose of any debris caught on the snake into the bucket or trash.
Run hot water down the drain to test if the clog is fully cleared.
Repeat the snaking process if water still drains slowly.
Use a mild drain cleaner if minor residue remains after snaking.
Clean the drain snake thoroughly with water and disinfectant.
Dry the snake and coil it properly for storage.
Reinstall the drain cover or stopper securely.
Wipe down the area around the drain to remove any splashes or residue.
Empty and clean the bucket used for collecting debris.
Wash your hands thoroughly after completing the task.
Store all tools and materials in a dry, safe location.
