Clear and cover your workspace with newspaper or a protective sheet to catch spills.
Use a hot glue gun or wick sticker to secure the wick to the center bottom of your container.
Measure the amount of wax needed for your container and place it in a double boiler or microwave-safe container.
Heat the wax slowly using a double boiler or microwave in short intervals, stirring frequently.
Use a thermometer to monitor the wax temperature and avoid overheating; keep it below 185°F.
Once melted, remove the wax from heat and allow it to cool slightly to around 160°F.
Add fragrance oil and candle dye if desired, following the recommended ratio on the packaging.
Stir the wax gently but thoroughly to evenly distribute the fragrance and color.
Slowly pour the wax into your prepared container, leaving about half an inch at the top.
Hold the wick upright or use a wick holder to keep it centered while the wax sets.
Allow the candle to cool and harden completely at room temperature for several hours.
If the wax sinks near the wick, reheat and pour a small amount of wax to top it off.
Once fully set, trim the wick to about 1/4 inch above the wax surface.
Inspect the candle for any cracks or imperfections and smooth the surface if needed.
Clean any wax drips from the container exterior using a warm cloth.
Label your candle if desired, especially if giving as a gift or selling.
Store the candle in a cool, dry place away from direct sunlight.
Perform a test burn to ensure the wick burns properly and the candle melts evenly.
Never leave a burning candle unattended during testing or regular use.
Dispose of any leftover wax safely or reuse it for another candle project.
