Park your vehicle on a flat surface and turn off the engine to ensure accurate fluid readings.
Allow the engine to cool for at least 30 minutes to prevent burns and ensure accurate measurements.
Open the hood and secure it with the prop rod if necessary.
Locate the engine oil dipstick, pull it out, wipe it clean, then reinsert and pull out again to check oil level.
Find the coolant reservoir, check the level against the marked minimum and maximum lines, and look for signs of leaks or discoloration.
Identify the brake fluid reservoir, verify the fluid level is between the minimum and maximum marks, and check for any leaks or contamination.
If accessible, locate the transmission fluid dipstick or fill port, and check the level following your vehicle's manual instructions.
Inspect the power steering fluid reservoir, ensuring the fluid is within the recommended level and looking for leaks or debris.
